Product News
Below is a list of our most recent product related news:
Wireless Fire Detection with XPander
September 22, 2011
Apollo has updated and extended its XPander range of wireless fire detectors. Designed for use in areas where hard-wired fire detection is impossible or impractical, XPander devices are ideal for use in educational buildings such as schools and universities.
Read more
Apollo Fire Releases XP95A 120V AC Input/Output Module
July 12, 2011
Providing reliable connections for North American fire and building control systems, Apollo Fire Detectors now offers the XP95A 120V AC Input/Output module. The loop powered relay can be used with Apollo’s XP95A range of analog addressable fire detectors, to control ancillary equipment such as 120V HVAC, air control, gas valve, and public address systems.
Read more
Apollo Launches Auto-Aligning Beam Detector with Laser Alignment
October 14, 2010
Apollo Fire Detectors Ltd. is pleased to announce the addition of the conventional Auto-Aligning Beam Detector with Laser Alignment to their extensive range of fire detection products. With a range of 8m to 100m, it has been specifically designed to be easy to install and maintain, and excels in detecting smoke in large, open areas such as warehouses, hangars, theatres, churches and sports centres.
Read more
New Range of Base-Mounted Flame Detectors
September 2, 2010
Apollo Fire Detectors Ltd. is bringing a range of eight new base-mounted flame detectors to the market, combining high performance with a compact design into a unit suitable for most land-based and marine applications. The devices’ Class 1 performance allows them to quickly detect 0.1m2 flames at a distance of 25m (EN54-10), and they can rapidly detect all types of flames – including those from a hydrogen source, which are invisible to the both the naked eye and some alternative flame detection systems.
Read more
OpenConnect Gateway
June 5, 2010
Apollo are in the final stages of developing new interfacing product called Apollo OpenConnect Gateway. This will be integrated by a variety of Fire Panel manufacturers who use Apollo detectors to enable integration with BMS systems via Bacnet, Modbus or LONworks.
Read more
New Mains Switching Input/Output Unit For DIN-Rail Mounting
January 26, 2009
Apollo's new mains switching input/output unit, designed for mounting on a DIN-rail, provides a voltage-free, single pole change-over relay output with a contact rating of 250V AC @ 5Amp and 48V DC @ 2Amp. It also has a monitored switch input that is designed to supervise one or more normally-open switches connected to a single-pair of cables.
Read more
Apollo's New DIN-Rail Sounder Controller Has Increased Current Capacity
January 12, 2009
Unit can drive higher powered sounders or up to five times as many conventional sounders Apollo Fire Detector's new DIN-Rail Sounder Controller has an increased current capacity from 1A to 5A allowing it to drive more powerful sounders or up to five times as many conventional sounders or visual warning devices.
Read more
Apollo Launches New XPander Range Of Intelligent Wireless Fire Detectors
May 28, 2008
The new XPander range of wireless intelligent fire detectors from Apollo is designed for use where wired detectors are either impractical or undesirable. Only available to companies who have had their engineers trained by Apollo in the use of wireless detectors, the XPander was developed to enhance the capabilities of Apollo's existing XP95 detector range.
Read more
Mini Switch Monitor Is Ideal For Limited Spaces
February 25, 2008
Measuring just 39mm x 39mm x 20mm, the new Mini Switch Monitor from Apollo Fire Detectors is a miniature interface with an entirely new housing ideal for installation in equipment with limited spaces. It can also be mounted within enclosures such as manual call points.
Read more
New wireless range among innovations from Apollo
March 5, 2007
The XPander range of wireless intelligent fire detectors is just one of several innovations to be launched by Apollo Fire Detectors at this year's show. The XPander range is designed for use where wired detectors are either impractical or undesirable and offers an instant fire protection solution using existing XP95-compatible control panel as another detector connected to the system.
Read more
Apollo Launches EN54 Compliant Manual Call Point
August 8, 2006
Apollo Fire Detectors has launched a new version of its XP95 and Discovery Manual Call Points which comply with EN54-11:2001. The new call point has a re-settable element for fast testing and re-setting of the device, with a single tool for both testing and re-setting. It also has 'plug and play'; terminal blocks for fast wiring.
Read more