Back

Wireless Carbon Monoxide Alarm

Product code: 51000-307

51000-307 - Wireless Carbon Monoxide Alarm
The Wireless Carbon Monoxide Alarm is a battery powered detector intended for use with a compatible wireless control panel. With a sleek and innovative design, the detector can be mounted to any ceiling without being obtrusive in the home.
Full Details
Product Information

The Wireless Carbon Monoxide Alarm is a battery powered detector intended for use with a compatible wireless control panel. With a sleek and innovative design, the detector can be mounted to any ceiling without being obtrusive in the home.

Brand Features

The detector consists of an electrochemical carbon monoxide sensor assembly coupled to a wireless transmitter. The Wireless Carbon Monoxide Alarm communicates with the control panel and can send alarm, tamper and battery condition messages to the system’s receiver. Local Sounder generates the ANSI S3.41 temporal 4 pattern in an alarm condition. In alarm, a message is sent to the control panel and the device ID is displayed at the console. A tricolored LED (green, yellow, red) provides local visual status indication for normal operation, alarm, low battery, trouble and end-of-life. End of Life Timer sends a trouble signal to the panel when the CO sensor has passed the end of its life (approximately six years from the date of manufacture) Built-in tamper switch will cause a tamper signal to be displayed at the console if removed from its mounting base. Dual purpose Test/Hush button allows the end-user to perform periodic testing of the detector and/or will silence the local sounder alarm for a five minute period in the event of a CO alarm.

Application

Carbon monoxide (CO) is an odorless, colorless, tasteless and highly toxic gas that is produced when fuels such as wood, gasoline, charcoal and oil are burned with insufficient air. The majority of residential fatalities caused from these fuels come from heating systems, engine powered tools and charcoal grills. Carbon monoxide is harmful when inhaled as it displaces oxygen in the blood, depriving vital organs of oxygen. Large amounts of CO can overcome a person in minutes without warning—causing them to lose consciousness and suffocate. Apollo’s 51000-307 Carbon Monoxide Alarm is designed to warn occupants of a CO event well before the CO reaches a fatal level. The alarm’s CO sensitivity is listed to the standards prescribed in UL 2034, UL 2075 and CSA 6.19-01.

Safety Note

All installations must strictly adhere to the provided installation instructions. Not doing so may result in device failure and risk of life loss. This device is designed to protect individuals from the acute effects of carbon monoxide exposure, It is not designed to measure compliance with Occupational Safety & Health Administration (OSHA) commercial and industrial standards.

Key Features

The detector consists of an electrochemical carbon monoxide sensor assembly coupled to a wireless transmitter. The Wireless Carbon Monoxide Alarm communicates with the control panel and can send alarm, tamper and battery condition messages to the system’s receiver. Local Sounder generates the ANSI S3.41 temporal 4 pattern in an alarm condition. In alarm, a message is sent to the control panel and the device ID is displayed at the console. A tricolored LED (green, yellow, red) provides local visual status indication for normal operation, alarm, low battery, trouble and end-of-life. End of Life Timer sends a trouble signal to the panel when the CO sensor has passed the end of its life (approximately six years from the date of manufacture) Built-in tamper switch will cause a tamper signal to be displayed at the console if removed from its mounting base. Dual purpose Test/Hush button allows the end-user to perform periodic testing of the detector and/or will silence the local sounder alarm for a five minute period in the event of a CO alarm.

General
WirelessYes
Warranty3 year
Performance
Operating elementPush button
Electrical
Status indicator - AlarmRed
Status indicator - FaultYellow
Flashing LEDYes
Battery poweredYes
Wireless
Battery sizeCR123
Environmental
Humidity (min)15% RH
Humidity (max)95% RH
Humidity Noteno condensation or icing
Humidity15% to 95% (no condensation or icing)
Operating temperature (min)4°C
Operating temperature (max)37°C
Operating temperature4 to 37°C
Conformance
Standards
  • UL 2034
  • CSA 6.19-01
Mechanical
ColourWhite